Posted on 29/09/2018
The following weekend we grinded down the spot welds around the roof from welding on the roof. We also went ahead and welded in the 2 corners on the front of the roof. Unfortunately I feel like I put too much heat into it, it seems to have warped a bit around the section I welded, making it droop inwards. Will have to tend to in the future.
Drivers:
Passengers:
Once all this was down, grinded back smooth we then went ahead and applied the sealant to finally finish off the roof install. I bought 2 tubes but only needed 1, can't complain with spares! So happy the roof is now finally sealed, it means I can try to start the car for the first time and drive it!
The sealant product..